|
Bradford White Hot Water Heaters
 TTW1® THROUGH-THE-WALL
- 1" Non-CFC foam insulation.
- Intermittent Pilot Ignition System - no standing pilot.
- Can be vented both horizontally and vertically.
- May be installed up to 30` from outside wall with 2" PVC vent pipe and 3 elbows.
- May be installed up to 90` from outside wall with 3" PVC vent pipe and 3 elbows.
- Agency approved for use with schedule 40 ABS, schedule 40 PVC and schedule 40 CPVC
- Power vented for positive exhaust.
- Vitraglas® lining.
- Protective magnesium anode rod.
- Factory installed dielectric waterway fittings
- Factory installed Hydrojet® Total Performance System.
- Smart Valve control.
- T & P relief valve opening on side of tank.
- Slider Combustion Chamber Door.
- Brass Drain Valve.
Return to Hot Water Heaters
|
